护坡塑料模具应用生产
Application and production of plastic mould for slope protection
护坡塑料模具生产工艺如下，在护坡塑料模具内装入混凝土震动成型，自然凝固干燥后脱模具就可以使用了，用厂房，适用于生产条件简单的野外场地，备有振动台、搅拌机即可生产，水泥制品表面光滑，不变形，不用托板，脱模时间短，周转次数快，可定做各种尺寸。
The production technology of the plastic mould for the slope protection is as follows. In the plastic mould of the slope protection, the concrete can be loaded into the concrete, and the mould can be used after the natural solidification and drying. It can be used in the field of simple production, with a vibrating table and a mixer. The surface of the cement is smooth, no deformation and no pallet are used. The mold release time is short and the turnover times are fast.
护坡模具的冬天保存
Preservation of slope molds in winter
护坡塑料模具材质为聚丙烯工程塑料，在冬季保管中要避免阳光直射，室外冰冻对模具的损害也是比较大的，一般采用库房堆垛存放，会延长塑料模具的使用年限
The plastic mold material of the slope protection is polypropylene engineering plastic. It is necessary to avoid direct sunlight in winter storage, and the damage to the mould is relatively large in outdoor freezing. The storage of storeroom is generally used to prolong the service life of the plastic mold.