护坡塑料模具形状尺寸多种多样如：六角护坡塑料模具、水渠护坡模具、防滑护坡模具，六角空心塑料模具，拱形护坡模具等，它们并不是成年使用的，而是以当月产量计算以完成一次的生产量。为了不影响它的下一次使用，使用后的清扫把保养工作很重要。

The slope shape and size of a variety of plastic mould such as: six angle slope of plastic mold, mold, non slip slope revetment drains six angle hollow mold, plastic mold, mold arch slope and so on, they are not adult use, but in the month to complete the production yield calculation time. In order not to affect its next use, the use of cleaning after the maintenance work is very important.

1、每隔一段时间，必须把护坡模具全分解，然后进行全部品清扫。

1, every other period of time, the slope must be completely decomposed mold, and then all the product cleaning.

2、在定期维护过程中，对护坡模具外表面，拆、换零部件进行彻底的清扫清理；

2, in the regular maintenance process, the slope of the outer surface of the mold, demolition and replacement parts for thorough cleaning;

3、装模前要对护坡模具的上下表面进行清擦，保证护坡模具安装面和压机工作台面不受压伤及护坡模具在生产中上下安装面的平行度。

3. The upper and lower surfaces of the slope protection mould shall be wiped off before the mould is installed, so as to ensure that the mounting surface of the slope protection die and the press work table are not pressed, and the parallelism of the mounting surface of the slope protection mould in the upper and the lower surfaces of the production is damaged.

4、护坡模具装好后，将护坡模具各部分清擦干净，特别是导向机构，其型面清擦干净，以保证制件的质量。

4, after the slope protection mould is installed, the parts of the slope protection mould are wiped clean, especially the guiding mechanism, and the shape of the surface is cleaned and cleaned, so as to ensure the quality of the parts.